Filter
Top Products
Removal and replacement procedures 91
Figure 85 Reinstalling the BBWC Assembly
System board removal and replacement procedure
To remove the system board:
1. Remove the top cover.
2. Remove the air baffle and all cables from the system board.
3. Loosen the nine screws that secure the system board to the chassis.
4. Slide the system board back, up and out of the chassis. Remove the system board from the
chassis.
Figure 86 Removing the System Board
To reinstall the system board:
1. Align the system board I/O connectors to their openings and slide the system board into place.
The screw holes on the tray should align with the system board.
2. Fasten the screws that secure the system board to the chassis.