Filter
Top Products
Removal and replacement procedures 81
Figure 67 Installing the PCI Expansion Board
Figure 68 Installing the Storage Card
CAUTION: Do not discard the slot cover. If the expansion board is removed in the future, the slot
cover must be reinstalled to maintain proper cooling.
To reinstall the PCI cage:
1. Install the PCI expansion board into the PCI cage.
a. Align the PCI expansion board with the open expansion slot.
b. Press the PCI expansion board into the expansion slot on the riser card.
2. Align the PCI cage to the system board expansion slot, and then press it down to ensure full
connection to the system board.
3. Tighten the four screws to secure the PCI cage to the chassis.