Filter
Top Products
HP PCL Commands
54 HP DeskJet 600, 700, 800, 900 & HP 2000 Series PCL Developer’s Guide
10.10 Vertical Positioning Commands
The following commands provide cursor positioning on the vertical axis.
10.10.1 Move CAP Vertical (Rows)
A signed value field indicates relative movement: plus (+) or minus (-) signs move CAP down-
ward and upward relative to CAP, respectively. The absence of a sign indicates absolute
movement: CAP moves from the top of the logical page, an absolute distance computed by:
Distance from top of logical page = top margin + (3/4 x VMI/48.0) + (value VMI)/48.0
Except for the following, the effect of this command is limited to the logical page:
44
Positive relative positioning allows movement to the next logical page.
44
Negative relative positioning allows movement above the top of form, up to the limit of the
logical page or the top of the physical page.
After power on or reset, CAP moves to the top of form, if not already there.
TABLE 33. Move CAP Vertical (Rows) - Esc & a # R
#
Value
DJ600
DJ610C
DJ660C
DJ670C
DJ680C
DJ690C
DJ695C
DJ810C
DJ830C
DJ850C
DJ870C
DJ880C
DJ890C
DJ895C
DJ970C
HP2000C
EFFECT
n
44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44
Moves CAP to the same
column position on a new line
based on the active line spacing
Default
n/a
Range
-32767 to +32767 - Command is ignored for out of range values