Filter
Top Products
HP PCL Commands
70 HP DeskJet 600, 700, 800, 900 & HP 2000 Series PCL Developer’s Guide
10.13 Raster Graphics
The following HP PCL commands apply to the printing of raster graphic images on HP Desk-
Jet 600/800/900 & HP 2000 Series printers.
10.13.1 Raster Mode
The Start Raster (Esc * r # A) command begins a restricted state called raster mode. Raster
mode locks out commands that would affect rendering of the graphics image. These com-
mands remain locked out until End Raster (Esc * r C).
10.13.2 Commands Locked Out of Raster Mode
The following raster commands are ignored in raster mode. They should be used to define a
graphic image’s parameters before entering graphics mode.
10.13.3 Commands Allowed in Raster Mode
The following commands may be used in raster mode without implicitly ending raster mode.
Configure Raster Data Esc * g # W
Simple Color Esc r # U
Source Raster Width Esc r # S
Start Raster Esc r # A
Compression Method Esc b # M
Seed Row Source Esc b # S
Transfer Raster by Row/Block Esc * b # W
Transfer Raster by Plane Esc b # V
Y Offset Esc b # Y