Overview
19hp StorageWorks SAN Switch 2/8 Installation Guide
■ One RS-232 Serial port (DB9 connector) on the front panel
■ One IEEE compliant RJ-45 connector on the front panel for use with 10/100
Mbps Ethernet or in-band
■ A total of 20 LEDs:
— One power switch LED on the front panel
— One port status LED for each of the 8 ports on the front panel
— One port speed LED for each of the 8 ports on the front panel
— One Ethernet speed LED on the front panel
— One Ethernet activity LED on the front panel
— One port readiness LED on the back panel
■ Universal input power supply with AC switch
■ Five fans
SFP Media Side
Figure 1 shows the SFP media side of the SAN Switch 2/8. The front panel houses
the Serial port, Ethernet port, eight fiber optic ports with corresponding LEDs, and
the power switch LED.
Figure 1: SFP media side
1 Serial port
2 Optical ports (8)
3 Port status LEDs (8)
4 Port speed LEDs (8)
5 Ethernet speed LED
6 Ethernet activity LED
7 Ethernet port
8 Switch power LED
9 Power connector
SHR-2493B
3
89
4
5
6
2
7
1