Filter
Top Products
Managing the SAN Switch 2/8
60 hp StorageWorks SAN Switch 2/8 Installation Guide
Interpreting LED Activity
SAN Switch 2/8 activity and status can be determined through the activity of the
LEDs on the switch. The LEDs will flash green, yellow, or orange while the
switch is booting and while POST or other diagnostic tests are running. This is
normal and does not indicate a problem.
Note: Any errors related to LED activity are listed in the error log. For information
about the error log, refer to the
hp StorageWorks Fabric OS
V3.0.x/V4.0.x
Procedures
Guide
.
Front Panel LEDs
The SAN Switch 2/8 front panel includes the following LEDs:
■ One power switch LED on the front panel
■ One port status LED above and to the left of each of the 8 ports
■ One port speed LED above and to the right of each of the 8 ports
Table 4 describes how front panel LEDs communicate switch status.