Filter
Top Products
Managing the SAN Switch 2/8
67hp StorageWorks SAN Switch 2/8 Installation Guide
Running Basic Switch Operations Using Telnet
Read the following sections to run common switch operations.
Logging into the SAN Switch 2/8
Use these steps to log into the SAN Switch 2/8.
1. Open a telnet connection to the switch. The login prompt is displayed if the
telnet connection successfully found the switch in the network.
Note: The switch must be connected to your IP network through the Ethernet port to
enable connection using telnet.
2. At the login prompt enter the user ID you are logging in as. For example:
login: admin
The password prompt is displayed if the user exists.
3. Enter the password for the user:
password: xxxxxx
The default password is password.
4. If the login was successful a prompt is displayed showing the switch name
and user ID you are logged in as. For example:
switch55>admin:
Changing the Admin Password and User ID
Use these steps to change the Admin user ID and password.
Note: For security reasons, the first time you log into the Fabric OS you are requested
to change the admin user ID and system password.
1. Log in to the switch as the admin user.
2. At the command line enter the following command:
Password admin