Filter
Top Products
Installing the SAN Switch 2/8
50 hp StorageWorks SAN Switch 2/8 Installation Guide
Connecting the SAN Switch 2/8 to the LAN
Use the following steps to connect the SAN Switch 2/8 to the Ethernet Local Area
Network (LAN) segment.
1. Remove the shipping plug from the SAN Switch 2/8 Ethernet port.
2. Connect one end of an Ethernet cable to the Ethernet port, see Figure 16.
Figure 16: Connecting the Ethernet cable
3. Connect the other end of the Ethernet cable to the workstation or to an
Ethernet network containing the workstation.
Note: You can now access the switch remotely (and from multiple connections), using
telnet or the Web Tools application. Verify that the switch is not accessed from any other
connections during the remaining steps.
4. Log on to the switch with administrative privileges by telnet. The default
administrative logon is admin and the default password is password.
SHR-2498B