![](http://pdfasset.owneriq.net/4/d0/4d086b37-4f85-4c47-8e55-9238d909b891/4d086b37-4f85-4c47-8e55-9238d909b891-bg92.png)
5–60 Maintenance and Service Guide
Removal and Replacement Procedures
2. Remove the Phillips PM2.5×6.0 screw 1 that secures the
USB/audio board to the base enclosure.
3. Remove the USB/audio board 2 from the base enclosure.
4. Disconnect the USB/audio board cable 3 from the
USB/audio board.
✎
The USB/audio board cable is available in the Cable Kit, spare
part number 407774-001.
Removing the USB/Audio Board
Reverse the above procedure to install the USB/audio board.