![](http://pdfasset.owneriq.net/4/d0/4d086b37-4f85-4c47-8e55-9238d909b891/4d086b37-4f85-4c47-8e55-9238d909b891-bg5d.png)
Removal and Replacement Procedures
Maintenance and Service Guide 5–7
2. Loosen the two black Phillips PM2.5×5.0 screws 1 that
secure the hard drive cover to the computer.
3. Lift the left edge of the hard drive cover 2 and swing it up
and to the right and remove it.
✎
The hard drive cover is included in the Plastics Kit, spare part
number 407778-001. The hard drive cover is also available
using spare part number 419328-001.
Removing the Hard Drive Cover