Filter
Top Products
Configuring the Kerberos Server with LDAP
Planning Your LDAP Configuration
Chapter 6 83
Planning Your LDAP Configuration
The following sections of this chapter describe how to plan and configure
your Kerberos Server to work with the Directory server.
Before You Begin
Remember the following points when you plan your LDAP setup:
• Use the Configuration Worksheet (see Appendix A, “Configuration
Worksheet,” on page 311) to record your decisions and other
information that you need later for configuration.
• You must have an LDAP directory. You can obtain the Netscape
Directory server 6.0 (J4258CA) for HP-UX from your local HP sales
office or http://www.hp.com and view the documentation at
http://docs.hp.com/hpux/internet/#Netscape%20Directory%20Server.
• See the white paper Preparing Your Directory for HP-UX Integration
at http://docs.hp.com/hpux/internet for advice on how to set up and
configure your directory to work with HP-UX.
• Most examples here use the Netscape Directory server 6.0 (J4258CA)
for HP-UX and assume you have some working knowledge of this
directory and its tools, such as the Directory Console and ldapsearch.
If you have another directory, consult your directory’s documentation
for specific information.
• The examples use a base DN of o=bambi.com for illustrative
purposes.