Filter
Top Products
10 Introduction
Operation indicators
The HP e1200-320 4Gb FC Interface Card has LED indicators for monitoring overall status as shown in
Figure 2.
Figure 2 Operation indictors
Table 3 Operation indicators
The LED functionality of the interface card is detailed below:
• Power and Fault (Pwr) – The bi-color LED is green when power is active, and is continuously
amber-colored when the interface card detects a fault condition.
• Fibre Channel Act – When green, the right ACT indicator signifies a good Fibre Channel link.
• Fibre Channel LNK – When green, the left LNK indicator signifies Fibre Channel port activity.
• SCSI bus (0, 1) – When lit, these green indicators signify SCSI activity on the bus corresponding to the
number of the indicator.
• Ethernet (10/100) – When lit, these green indicators signify Ethernet link status and activity.
• Beacon – This blue indicator can blink or light continuously for unit identification.
Number Description
1Power LED
2 Ethernet link indicator
3 Ethernet activity indicator
4 ACT (activity) /LNK (link) LED indicators for the Fibre Channel port
5 Activity indicators for the SCSI busses(1, 0)
6 Beacon indicator