HP (Hewlett-Packard) E1200-320 Network Card User Manual


 
e1200-320 4Gb Fibre Channel Interface Card user and service guide 111
EVPD Page 0x80
If the EVPD bit is set and the Page Code is 0x80 the unit serial number page is returned. The format of this
page is shown in Table 15.
Table 15 Format of EVPD Page 0x80
The serial number field is a 16-byte left-justified ASCII string.
Device Identification Page 0x83
If the EVPD bit is set and the Page Code is 0x83 the device identification page is returned, as described
in SPC-2 section 8.4.4.
Table 16 HP e1200-320 4Gb Interface Card LUN Inquiry Data
The interface card will only reply to a SCSI Inquiry when using 8-byte LUN field of 0x00's.
Bit
Byte
7654321 0
0Device Type (0ch)
1 Page Code (80h)
3 Reserved
4Page Length
5...20
Serial Number
Item Value
Peripheral Qualifier 0x00
Peripheral Device Type 0x0C - Indicates Router/interface card function
RMB 0x00
Device Type Qualifier 0x00
ISO Version 0x00
AENC 0x00
TrmIOP 0x00
Response Data Format 0x02 - SCSI-2 Inquiry Data Format
Additional Length 0x20
RelAdr 0x00
Wbus32 0x00
Wbus16 0x00
Sync 0x00
Linked 0x00
CmdQue 0x00
SftRe 0x00
Vendor ID “CROSSRDS”
Product ID “interface card interface card”
Revision Level “XXXXX”