HP (Hewlett-Packard) E1200-320 Network Card User Manual


 
52 Visual manager user interface
Current, previous, and last assert trace displays
These three Utilities menu screens show trace information.
The Current Traces screen shows data since the interface card was last booted.
The Previous Traces screen shows data from the last boot cycle.
The Last Assert Traces screen shows data since the last assertion.
Trace buffers can be cleared by selecting either the Clear Current Traces option or the Clear Assert Traces
option.
Clear current trace buffer or assert trace buffer
Trace buffers can be cleared by selecting either the Clear Current Traces option or the Clear Assert Traces
option. When the Clear Current Traces option is selected, a confirmation message appears to verify the
selection. If a response of Yes is given, the unit clears the current trace buffer. Current interface card
activities are not disrupted while the buffer is cleared. Select the Submit button to finalize your choice.
Event log settings
The Event Log Settings screen is used to configure Event Log filters
(see Figure 35).
Figure 35 Event Log Settings screen
Event Log settings:
Disable/Enable Logging
Emergency Events
Alert Events
Critical Events
Error Events
INBAND Controller management functionality is monitored and recorded
Queue Element Debugging capability for specific interface card resources
Table 6 Trace Settings
Setting Description