Filter
Top Products
Care and maintenance 57
LCD error messages
Install ink
cartridge
Print cartridge is not installed or improperly installed.
Invalid Time The time you set for fax forwarding is wrong.
Job Not Assigned You attempted to cancel a scheduled job but no jobs are
scheduled.
You attempted to delete, print or send the Favorites
document when there is no document stored.
Junk Fax Empty You attempted to delete a junk fax number when there is no
junk fax number.
Junk Fax Full The machine can hold only 20 junk fax numbers.
Load Document You must load a document before proceeding.
Memory Full Memory has become full while receiving a fax. It will not
answer the telephone until memory has been cleared. Print
any faxes stored in memory and, if necessary, clear
scheduled jobs See Reprinting faxes on page 44 and see
Clearing memory on page 45.
Memory Full
Press OK to
continue
Memory has become full while scanning a document. Press
OK to send or copy the scanned pages only. To cancel the
job press Cancel and try again when memory becomes
available, or split the new document into smaller parts. See
Clearing memory on page 45.
Memory Received
Ink Low. Install
new ink cartridge
The machine has data stored in memory. Replace the print
cartridge with new one in order to print the faxes.
Memory Received
Load paper and
press OK
Load paper and press OK. There might be a jam. Clear the
jam as described in Paper jams during printing on
page 51.
Memory Received
Install ink
cartridge
There is no print cartridge in the machine. Install a print
cartridge.
No answer from
remote fax
The other machine has not answered after all redial attempts
to send a fax.
No CID Number The machine could not detect the CID (Caller ID) number.
Display Status/Solution