Filter
Top Products
Control panel message Description Recommended action
and then on again as you install each
device.
10. Replace the component that caused the
error message.
51.XY ERROR To continue turn off then
on
A temporary error has occurred. 1. Turn the device off, and then turn the
device on.
2. If the message persists, replace the
formatter.
52.XY ERROR To continue turn off then
on
A temporary error has occurred. 1. Turn the device off, and then turn the
device on.
2. If the message persists, replace the
formatter.
54.XX ERROR To continue turn off then
on
A temporary error has occurred. 1. Turn the device off, and then turn the
device on.
2. If the message persists, replace the
formatter.
55.XX DC CONTROLLER ERROR To
continue turn off then on
The device is not communicating with the
formatter.
1. Turn the device off, and then turn the
device on.
2. Reseat the formatter.
3. Check to find out if an RFU is available.
If it is, perform the RFU.
4. If the error persists, replace the
formatter. See
Formatter cage
on page 49.
56.XX ERROR To continue turn off then
on
A temporary error has occurred. 1. Turn the device off, and then turn the
device on.
2. Reseat the formatter.
3. Check to find out if an RFU is available.
If it is, perform the RFU.
4. If the error persists, replace the
formatter. See
Formatter cage
on page 49.
57.XX ERROR To continue turn off then
on
A temporary error has occurred. 1. Turn the device off, and then turn the
device on.
2. If the error persists, check the fan
connectors and then make sure that the
fan blades can move freely.
3. Listen for the fans to operate while the
device is initializing. If the fan does not
operate during the initialization
sequence, replace it.
59.XY ERROR To continue turn off then
on
A temporary error has occurred. 1. Turn the device off, and then turn the
device on.
2. If the message persists, replace the
formatter.
Table 6-1 Control-panel messages (continued)
ENWW Control-panel messages 117