Filter
Top Products
Use the control panel
The control panel has a VGA touchscreen that provides access to all device functions. Use the buttons
and numeric keypad to control jobs and the device status. The LEDs indicate overall device status.
Control-panel layout
The control panel includes a touchscreen graphical display, job-control buttons, a numeric keypad, and
three light-emitting diode (LED) status lights.
Figure 1-1 Control-panel layout
1 Attention light The Attention light indicates that the
device has a condition that requires
intervention, such as an error message
on the touchscreen.
2 Data light The Data light indicates that the device is
receiving data.
3 Ready light The Ready light indicates that the device
is ready to begin processing a job.
4 Brightness-adjustment dial Turn the dial to control the brightness of
the touchscreen.
5 Touchscreen graphical display Use the touchscreen to open and set up
all device functions.
6 Numeric keypad Use the keypad to type numeric values,
such as a fax number.
7 Sleep button and light If the device is inactive for a long period
of time, it automatically enters Sleep
mode. To place the device into Sleep
mode or to reactivate the device, press
the Sleep button. When the light is
glowing, the device is in Sleep mode.
8 Reset button Resets the job settings to factory or user-
defined default values.
8 Chapter 1 Device information ENWW