Filter
Top Products
Chapter 5Load paper or transparency film, or load originals 17
HP OfficeJet G Series
Continuous (banner) paper (only works with printing)
Continuous, banner paper is also known as computer or z-fold paper.
Before loading banner paper, remove all other paper from the input tray, and then
raise the output tray above the catch on the right side.
If you use non-HP paper, use 20-lb. paper and fan the paper before loading it.
Verify that the stack of banner paper contains at least five pages in the stack.
Carefully tear off the perforated edge strips from both sides of the paper stack, if
any, and unfold and refold the paper to make sure the pages do not stick together.
Put the paper in the input tray so that the unattached edge is at the top of the stack.
Insert the first edge into the input tray until it stops.
Load the input tray with envelopes (only works with printing)
Your HP OfficeJet provides two methods for working with envelopes. Do
not
use shiny
or embossed envelopes or envelopes that have clasps or windows.
If you are printing one envelope, use the envelope slot. Slide the envelope into the
envelope slot located on the right side toward the back of the output tray, with the
envelope flap up and on the left, until it stops.
Raise the output tray
above the catch on the
right side.
AvMac.book Page 17 Friday, June 23, 2000 10:34 AM