Filter
Top Products
38 Chapter 10Use the fax features
HP OfficeJet G Series
Enable fax confirmation
Your HP OfficeJet is set to print a report only if there is a problem with sending or
receiving a fax. A confirmation message that indicates whether a fax was successfully
sent appears briefly on the front-panel display after each fax. If you need printed
confirmation that your faxes are successfully sent, follow these instructions
before
sending any faxes.
To do this using the front panel
1 Press Menu.
2 Press 3, and then press 6.
3 After 1. Automatic Reports Setup appears, press ENTER.
4 Press
X
(>) until Print Report Send Only appears.
5 Press ENTER to select it.
To do this using the Macintosh
1 In the Director, click Toolbox.
The HP Toolbox dialog box appears.
2 In the Toolbox, click Device Configuration.
The All-in-One Device Settings dialog box appears with the General tab visible.
AvMac.book Page 38 Friday, June 23, 2000 10:34 AM