Filter
Top Products
To load envelopes
1. Pull out the main input tray, and then slide the paper-width and paper-length guides
to their outermost positions.
2. Remove all paper from the main input tray.
3. Insert one or more envelopes into the far-right side of the main input tray with the
envelope flaps up and on the left. Slide the stack of envelopes forward until it stops.
4. Slide the paper-width guide inward against the stack of envelopes until it stops.
Do not overload the main input tray; make sure the stack of envelopes fits within the
main input tray and is not higher than the top of the paper-width guide.
5. Push the main input tray back into the HP All-in-One.
6. Pull the output tray extender toward you, as far as it will go.
NOTE: When you use legal-size paper, leave the tray extender closed.
Related topics
“
Change the print settings for the current job” on page 76
Load paper 69
Load originals and load paper