Filter
Top Products
Chapter 9 Connecting the Monitor, Keyboard, Mouse, and UPS
98
NOTE If you have a console switch box, refer to the switch box’s user
guide for instructions on connecting the keyboard, mouse, and
monitor.
CAUTION The Keyboard and Mouse ports are both PS/2 ports, but are
not interchangeable. If you plug the keyboard into the Mouse
port, or the mouse into the Keyboard port, you will get an
error message and the system will not finish the boot process.
Connecting the UPS (Uninterruptible Power Supply)
1. If you have an UPS (Uninterruptible Power Supply) installed in the rack,
turn it on.
2. Connect the provided serial cable between the UPS and the HP NetServer
as specified in the HP Rack Installation Road Map.
Refer to the user guide included with the UPS and to the HP Rack
Installation Road Map for additional information.