Filter
Top Products
Chapter 6 Installing Additional Boards
69
1. Insert Board
2. Close Latch
3. Turn Tab
Figure 6-4. Installing the Accessory Board
12. Secure the PCI board as shown in Figure 6-4.
13. If the installed accessory board requires an external connection or a
connection to the System board, ensure the cable is properly attached.
Refer to the accessory board documentation for connection requirements.
14. If accessory board installation is complete, re-install the cover on the
NetServer.
Refer to Chapter 3, "Opening and Closing the HP NetServer."
15. Re-install the bezel onto the front of the HP NetServer.
Refer to Chapter 3, "Opening and Closing the HP NetServer."