Filter
Top Products
2-20 Removal and Replacement HP OmniBook XE2
Installing a New Serial Number Label
If you do not have a master file that creates serial number labels, get a copy from the Reseller website
(see page vi) under Product Support Information in the Service and Support Library.
1. Using any PC connected to a laser printer, open the master serial label file, enter the serial number
and product number from the old serial label, and print the new label on plain white paper. The
new label does not have barcodes.
2. Carefully cut out the new serial label just inside the border and place it into the inner recess in the
bottom case. The bottom of the label goes toward the front of the case.
3. While holding the paper label in place, attach a serial label overlay (HP Part #7121-7525) into the
outer recess. It covers and protects the serial label.