Error messages 134
IMPORTANT: Processor socket 1 and PPM slot 1 must be populated at all times or the server does not
function properly.
• PPMs, except the PPM installed in slot 1
• DIMMs, except the first bank
• Hard drives
• Peripheral devices
2. Install each remaining system component, rebooting between each installation to isolate any failed
components.
3. Clear the system NVRAM.
4. Replace the system board.
IMPORTANT: If replacing the system board or clearing NVRAM, you must re-enter the server serial number
through RBSU ("Re-entering the server serial number and product ID" on page 57).
Message ID: 4137
Severity: Error
Description: The processor in slot X, socket X has corrected an excessive number of internal errors. The
system will continue to operate.
Action: Replace the processor.
Message ID: 4140
Severity: Warning
Description: The system is operating with a heterogeneous processor environment.
Action: None
Message ID: 4141
Severity: Warning
Description: Only X out of the X installed processors have been started by the operating system. The
system will continue to operate.
Action: Confirm that the license agreement in use supports all of the installed processors.
Message ID: 4169
Severity: Warning
Description: The processor in slot X, socket X has corrected an excessive number of internal errors. The
system will continue to operate.
Action: Replace the processor.
Message ID: 4190
Severity: Error
Windows
®
Event Log processor error codes