Filter
Top Products
NEC CONFIDENTIAL 4-101
4.2.6.4 Setting test parameter
The test parameter is set with some menus. The menus are available to specify a test controller, test target
device, and test item in combination.
Input procedure in each test item
Table 4-1 lists the menu displayed when each test item is selected. Figure 4.1 shows the display-related dia-
gram of each menu. The following section provides more information of each menu in the table.
Table 4-1 Menus displayed when test items are selected
Test itemMenu
Random read test
Sequential read test
Random W/R test
Sequential W/R test
One block read tes
t
Play audio tes
t
(a) Select test controller menu X X X X X X
(b) Select test device menu X X X X X X
(c) Select test LUN menu X X X X - -
(d) Select test item menu #1 X X X X X X
(e) Select test item menu #2 X X X X X X
(f) Password check menu - - X X - -
(g) Data deletion check menu - - X X - -
(h) Select test block menu XXXXX -
(i) Select data transfer mode menu X X X X X -
(j) Select test counts menu X X X X X X
(k) Select data transfer length menu X X X X X -
(l) Select play track menu - - - - - X
(m) Select write data value menu - - X X - -
(n) Warning message * * * * * *
Legends X: Displayed
-: Not displayed.
*: May be displayed depending on the device condition.