Filter
Top Products
4-39
4.1.7 IOTLB Test
4.1.7.1 Test overview
Checks the IOTLB (Input/Output Translation look-aside buffer) in the rx9610 chip-set.
IOTLB Control Register Access TEST
IOTLB Direct Access TEST
4.1.7.2 Test target
Test target is the IOTLB in the rx9610 chip-set.
4.1.7.3 Preparation before test
No preparation is required
4.1.7.4 Setting the Test Parameters
Selecting “IOTLB” from the “PROMPTED EXECUTION MENU” causes the “Test Select menu” shown in
Figure 4-1 to be displayed.
(IOT) IOTLB Test Select Menu
*(CRA) IOTLB Control Register Access Test
*(DAT) IOTLB Direct Access Test
(END) Select End
Figure 4-1 Test Select menu
• Default selection is both " IOTLB Control Register Access Test " and " IOTLB Direct Access
Test ".