Filter
Top Products
NEC CONFIDENTIAL 4-115
Description of each menu of Select test item
(a) Select test controller menu
When selecting FCP test, “(a) Select test controller menu” shown in Error! Reference source not found.
is displayed. In this menu, select the test controller.
(SEL) PCI SLOT SELECT
(END)_ Select end
(001)_ Slot 001
Selection complete
Select test controller
Figure 4.1 Select test controller menu
• The menu to be displayed varies depending on the controller connection status. The above figure
is a display sample. In this example, there is FC controller on the PCI board slot #001.
(b) Select test device menu
On “(b) Select test device menu” shown in Error! Reference source not found., select the test device.
(ID) Select test device
(#000) ID
_
0 : HOST : controller : Tachyon
_
TL Rev.0b
(#016) ID 16 : HDD : RANDOM READ: SEAGATE ST336704FC
HP07
(#018) ID 18 : HDD : NOT TEST___: SEAGATE ST318304FC
HP07
(END) Select end
select device
Select end
Figure 4.1 Select test device menu
• The menu to be displayed varies depending on the device connection status. The above figure is
a display sample.
• SCSI ID, device type, test name and device name are displayed for each device. In the example
above, HDD device is connected to SCSI ID 16 and 18, and Random read test is selected for the
SCSI ID 16.
(c) Select test LUN menu
On “(c) Select test LUN menu” shown in Error! Reference source not found., select the test LUN.
(LUN) Select test LUN
(LUN0) RAID1 : NOT TEST :
(LUN1) RAID5 : RANDOM READ :
(LUN2) NO ASSIGN : NOT TEST :
(LUN3) NO ASSIGN : NOT TEST :
(LUN4) HOT SPARE : NOT TEST :
……
(END) Select end
Select LUN
Selection complete
Figure 4.1 Select test LUN menu
• This menu is displayed only for the device that supports multi LUN. If it is not necessary to se-
lect the LUN for the test, this menu is not displayed.
• The LUN type, test item and FRU (or disk numbers) are displayed for each LUN. In the example
above, Random read test is selected for the LUN.