Filter
Top Products
2-17
Figure 2.1, “UTILITY MENU” appears as shown in Figure 2.1 so that you can select the utility provided by
I-Ciser. When you selected “CANCEL”, the utility menu ends.
(UTL)UTILITY MENU
(DFD) HDD FW download
(CANCEL)
Figure 2.1 UTILITY MENU
• When you update the firmware of hard disks, you select “HDD FW download” in this menu.
After selecting “HDD FW download”, “PCI SLOT SELECT” menu is displayed.
• When you select “CANCEL”, “DIAGNOSTIC MAIN MENU” is displayed.
2.3.4.1 HDD FW download
“HDD FW download” is HP Corporation specific function.
Supported device
Following table shows the supported device list of “HDD FW download”.
Table 2.1 supported device list of HDD FD download
Vender Name Device Name Capacity
Seagate ST318404LC 18.4GB
Seagate ST336704LC 36.7GB
Seagate ST373405LC 73.4GB
Fujitsu MAN3184MC 18.4GB
Fujitsu MAN3367MC 36.7GB
6 Fujitsu MAN3735MC 73.5GB
Support medium
“HDD FW download” function supports DAT and CD-ROM(CD-R/CD-RW) as a medium that includes
Firmware file to be downloaded.
Note : “HDD FW download” supports only HP specific Firmware file that contains HP specific header file.
(a) How to make DAT
To make DAT that contains Firmware file to be downloaded, use UNIX “tar” command.
Example) tar –cvf /dev/rmt/xx filename filename ….
Note 1: Do not specify directory in tar command.
Note 2: Do not specify option “b” in tar command.
(b) How to make CD-ROM(CD-R/CD-RW)
To make CD-ROM(CD-R/CD-RW) that contains Firmware file to be downloaded, use ISO9660 format.