Filter
Top Products
2-28
(INF) Information
Insert a superdisk medium for log-
out.
OK
Figure 2.4 Message for Super Disk media check
[Notes when the log is output to the Super Disk media]
(1) Output to Super Disk is not available on the Rx9610 system that has no LS-120 device installed.
(2) Prepare the formatted media. (A file shall not be created in the media.)
(3) After selecting “SuperDisk” in the menu shown in Figure 2.1, do not remove the media from the device
until the log output processing is complete and the target scope is displayed.