Filter
Top Products
2 While holding the scanner up, position the item face up in the upper left
corner of the holder, with the top of the item towards the hinge. Use the
media placement tabs on the holder to help position the item.
3 Return the scanner to its original position on the holder. You can see the
item face up through the scanner glass.
For instructions on how to scan pictures and documents, see Scan pictures and
documents .
Position a single item with the HP Scanjet 4650/4670
1 Pull the top edge of the scanner away from the holder, rotating the scanner
forward in the holder. The scanner can rest against the front edge of the
holder.
2 Position the item face up in the lower left corner of the holder, with the top of
the item facing left. Use the media placement tabs on the holder to help
position the item.
3 Return the scanner to its original position on the holder. You can see the
item face up through the scanner glass.
For instructions on how to scan pictures and documents, see Scan pictures and
documents .
Position a page of a thick document for scanning
The best way to scan a thick document is to place the document printed side
down on the scanner. This helps to make better contact between the document
and the scanner glass.
1 Remove the scanner from the holder:
a If you have a horizontal holder, remove the scanner by pressing down
on one tab on the hinge and then lifting the scanner off the holder.
b If you have a vertical holder, remove the scanner by lifting it off the
holder.
Chapter 1
8 HP Scanjet 4600 series scanner