Filter
Top Products
1
2
4
3
HP Scanjet 4650/4670 scanner
1 Scanner
2 Vertical holder, with folding legs for storage. Used for positioning and
holding items for scanning
3 Optional transparent materials adapter (TMA) for scanning 35 mm slides
and negatives.
4 Power supply
Place the scanner in the holder
Note The holder can be used for holding the scanner, positioning items to
scan, and providing a flat surface on which to scan. The holder is not
necessary for scanning.
Place the scanner in the horizontal holder (HP Scanjet 4600/4630)
1 Set the horizontal holder on a flat surface.
Make sure the hinge in the holder is rotated
forward.
2 Lay the scanner on the holder, viewing side
(light frame) up (
), in contact with the
hinge. The buttons face away from the
hinge. The cord exits the scanner next to
the hinge.
3 Press the back of the scanner down until it
clicks into place in the hinge.
Place the scanner in the vertical holder (HP Scanjet 4650/4670)
1 Make sure both legs are fully extended before placing the
scanner in the holder. This ensures the holder is stable.
Open the support legs by rotating them into place:
a Open the rear support first, and then make sure it
clicks into the fully open position.
b Rotate the front support from behind the holder to the
front of the holder until it clicks into place.
2 Set the holder on a flat surface.
How to use the scanner
User's Manual 3