Filter
Top Products
5. Grasp the handle on top of the hard drive cage (1) and slide the cage toward the outer edge of
the computer, then lift the cage out of the computer (2).
Figure 6-15 Removing the hard drive cage
6. Remove the four mounting screws that secure the drive to the cage. Do not remove the blue
rubber grommets behind each screw. They must stay attached to the cage when installing a new
hard drive.
NOTE: Inspect the four blue rubber grommets in case some of them are damaged or lost.
Grommet spare parts are available.
Figure 6-16 Removing the hard drive mounting screws
40 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis