Filter
Top Products
12. Rotate the bottom of the board upward (3), and then remove the board from the computer.
Figure 6-31 Removing the sidekey board
13. If you need to remove the cable:
a. Remove the stand bracket by removing the four black Torx screws that secure it to the
computer (1), and then lifting the bracket from the computer (2).
Figure 6-32 Removing the stand bracket
b. Disconnect the cable from the PB/LED connector on the system board. The following image
shows the cable highlighted by arrows.
52 Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis