Filter
Top Products
Display Cable
The main display cable is located just above the system board. The heat sink covers the connector
on the display panel.
Figure 6-47 Display cable location
To remove the display cable:
1. Prepare the computer for disassembly (see
Preparing to Disassemble the Computer
on page 29).
2. Remove the center access panel (see
Center Access Panel on page 32).
3. Remove the memory access panel (see
Memory Access Panel on page 34).
4. Remove the drive access panel (see
Drive Access Panel on page 35).
5. Remove the stand (see
Stand on page 33).
6. Remove the optical drive (see
Optical Drive on page 37).
7. Remove the top panel (see
Top Panel on page 45).
8. Remove the rear cover (see
Rear Cover on page 48).
9. Remove the system board cover (see
System Board Cover on page 49).
10. Remove the heat sink (see
Heat Sink (Thermal Module) on page 59.
11. Disconnect the cable from the LVDS1 connector on the system board (1).
Display Cable 65