HP (Hewlett-Packard) TC3100 Network Card User Manual


 
Chapter 1 Quick Start
If connecting via modem, enter the card's PPP IP address that you
entered when you ran the HP Server Remote Management Card BIOS
setup (for example: http://xxx.xxx.xxx.xxx/).
Once you are connected, the HP Server Remote Management Card Identity
page is displayed in your browser window (see Figure 5-1).
4. Click the Configuration Tab. The login prompt is displayed.
5. In the User Name field, enter a valid administrator name. For your first
login, the factory default name is ADMIN.
6. At the password prompt, enter the password that belongs to the
administrator name. For your first login, the factory default password is
ADMIN.
NOTE The user ID and the access password for the HP Server Remote
Management Card software are case sensitive. To avoid a
potential security breach allowing someone to log in using the
defaults, your first task should be to set up an administrator for
the card. Under Configuration|User, create a new user assigned
to the "Administrator" group and assign a new password. Then
delete the default ADMIN user account.
7. Once logged into the HP Server Remote Management Card web interface,
create your user groups and set your communication and notification
preferences. If you have HP Toptools Device Manager, you can perform
some administration actions on multiple cards at once. See online help for
details (click the "?" button in the upper right corner of the browser
window).
You are now logged on to the HP Server Remote Management Card. For a
description of features, see the section, "HP Server Remote Management Card
Features and Functions," in Chapter 2.
4