Filter
Top Products
Chapter 7 Troubleshooting
user from monopolizing access, especially when the connection is forgotten. This
automatic logout feature is not adjustable.
The keys I type from the remote client do not appear on the server screen.
Type in the keyboard lock password to unlock the keyboard. The keyboard will
remain unlocked until the next system reboot. If the password does not enable the
keyboard, try toggling the Numlock key at the server to enable the numeric
keypad.
My power control functions appear to be disabled.
Power control functions are disabled when the server's keyboard lock is on. To
turn off keyboard lock, either execute a remote Reset, or type in the keyboard lock
password using Text Remote Control. Verify that the ribbon cable is properly
connected both to the HP Server Remote Management Card and to the HP
Server's system board.
NOTE If you are a member of the "User" group, controlling server
power functions is not one of your privileges.
Some of my remote control functions appear to be disabled.
If the server's power goes down, some HP Server Remote Management Card
functions that require the server to be powered up are also suspended, including
console redirection, PCI Bus Utilization monitoring, and server resets.
The card does not accept a new connection even if I have closed a previous
connection.
The HP Server Remote Management Card allows a maximum of 30 HTTP
connections to be opened at the same time. If you are closing an HTTP connection
it may take about two minutes until the socket disappears. During this time a new
connection may be rejected if the total amount of active sockets is greater than 30.
While using the Netscape browser, resizing of the window logs me out.
If the Netscape client browser window displaying the HP Server Remote
Management Card page is resized or refreshed, the remote client will be logged
out for security reasons. Log in again using your login name and password.
53