Filter
Top Products
Chapter 4 Setting Up the Remote Connection
7. Click the "TCP/IP Settings" button (see Figure 4-10). Select the "Server
assigned IP address" option. The client will automatically get an IP
Address from the HP Server Remote Management Card. Check "Specify
name server addresses" and make sure all DNS and WINS entry fields are
set to zero (0). Uncheck "Use default gateway on remote network."
Click OK.
NOTE The card derives the address using the PPP IP address of the
card which it increments by "1". If the resulting address is
equal to "0" or "255," it is incremented by "1" again.
Figure 4-10. Define TCP/IP Settings
30