Filter
Top Products
Chapter 6 Setting Up NT Graphics Console Redirection Using pcAnywhere
3. To make a new connection item for your server, double-click the "Add Be
a Host PC Item".
4. Configure the connection item for LAN or modem use.
◊ LAN connection: Select TCP/IP as the connection device.
◊ Modem connection: You will be prompted for a Host Name and
connection device. Select the COM port (not modem) assigned by the
HP Server Remote Management Card's serial driver (see previous
section).
With your selected COM port highlighted, click Details and check the
communications parameters assigned to the port. Configure the port as
shown in Figure 6-3.
Figure 6-3. Configuring the Server-side COM Port in pcAnywhere
5. Click OK, then Next, and deselect the checkbox to "Automatically launch
after wizard," then click Finish. Your new connection item appears in the
pcAnywhere main window.
6. Right-click your new connection item and click "Properties".
42