Filter
Top Products
156 Chapter 6
Boot Console Handler
Displaying the Current Memory Configuration
Displaying the Current Memory Configuration
The following sample screen output uses the
memory
command to show a memory
configuration table with properly-installed and configured memory.
To display the current memory configuration for the system, from the Information Menu of
the Boot Console Handler, follow the directions in “Accessing the Boot Console Handler”
earlier in this chapter. Once you are in the Boot Console Handler Main Menu, type the
following at the prompt and press
Enter
:
Main Menu: Enter command> information
This places you in the Information Menu. From here, type the following at the prompt and
press
Enter
:
Information Menu: Enter command> memory
The screen displays status and configuration information for the memory DIMMs installed
in the workstation. See the section “Memory Information Sample.”
Memory Information Sample
The following example shows the memory information when memory modules are properly
installed and configured:
MEMORY INFORMATION
MEMORY STATUS TABLE
Slot Size Status
---- ------ -------------
0 256MB Active
1 256MB Active
2 128MB Active
TOTAL MEMORY = 640MB
MEMORY FAULT TABLE
Slot Size Status
---- ------ -------------
Active, Installed Memory : 640MB of SDRAM
Deallocated Pages : 0 Pages
-----------
Available Memory : 640MB
Good Memory Required by OS : 0 (Not Initialized)
Memory
HVERSION SVERSION
-------- ----------
0x0860 0x0900