Filter
Top Products
68 Chapter 3
Troubleshooting
Selftest Failures
WRN 8A03 EXT IO No graph console
Cannot re-establish communications with
the graphics console.
WRN 8A04 EXT IO No USB keyboard
Cannot re-establish communications with
the USB keyboard.
TST 8C06 EXT IO PCI BIST test
Running PCI Built-In Self-Test
WRN 8C07 EXT IO PCI BIST error
PCI Built-In Self-Test failed.
WRN 8C08 SYS BD PCI alloc error
PCI address space allocation failed.
WRN 8C09 IO BD PCI mem mngr err
Memory allocation for PCI device failed.
WRN 8C0A EXT IO PCI mem type err
PCI device requested invalid memory
type.
WRN 8C0B IO BD PCI max bus dpth
PCI bus depth exceeded maximum
supported depth.
WRN 8C0C EXT IO PCI dev not cnfg
Unable to configure PCI device.
WRN 8C0F IO BD dev tree ovrflow
Data space for PCI devices is full.
WRN 8DEC IO BD init LAN SROM
Initializing the core LAN serial EPROM.
SHU 8DEC IO BD resetting system
Restarting system after core LAN
initialization.
FLT 8E10 IO BD PARALEL port cfg
Parallel port configuration failed.
FLT 8E11 IO BD SERIAL1 port cfg
Serial 1 port configuration failed.
FLT 8E12 IO BD SERIAL2 port cfg
Serial 2 port configuration failed.
FLT 8E13 IO BD FLOPPY drive cfg
Floppy drive configuration failed.
FLT 8E20 IO BD bad USB port cfg
USB port configuration failed.
WRN 9001 EXT IO no console found
Search for console display device failed.
INI 9151 IO BD init SERIAL_1
Initializing serial 1 port as console
display.
INI 9152 IO BD init SERIAL_2
Initializing serial 2 port as console
display.
INI 915F IO BD init unknown dev
Initializing unknown device as console
display.
INI 9160 EXT IO builtin GRAPHICS
Initializing built-in graphics as console
display.
INI 916
s
EXT IO init PCI slot
s
Initializing PCI device in slot s as console
display.
Table 3-2. Chassis Codes for the B2000 Workstation
Ostat Code FRU Message
Description