Filter
Top Products
41
3.5 Manual conguration
There are 3 options for the manual
conguration.
• Prole (
below)
• History (42)
• Congure Network Settings Manually (43)
• To check the setting in a prole data, follow the process below.
1) Choose a prole data that you want to check.
2) Move the mouse cursor to the prole data, and click the right button on the
mouse to display a pop-up menu.
3) Select the “Property” in the pop-up menu, and click the left button on the
mouse.
4) The setting information of the selected prole data is shown.
• If the DHCP is set on in the projector, the network connection between the
projector and PC may not be established since IP address may be varied. If
you like to use the Prole connection, set the DHCP off in the projector.
NOTE
Selecting a prole data connect the network
with the projector.
It is required to store the prole data in
advance. (
60)
1) Select [Prole].
2) Choose a prole data listed in the window.
3) Click [Connect].
4) The network connection will be established.
Proceed to the item 3.6 Conrm the
connection to your destination. (50)
3.5.1 Prole connection
3. Using the Live Mode