Hitachi CP-X417 Projector User Manual


 
24
3. Using the Live Mode
3.2.2 Software Installation Procedure
1) Turn on the PC.
2) Shut down all applications.
3) Insert the accompanying CD-ROM into the
PC's CD-ROM drive.
4) After a moment, the Welcome dialog will
appear as shown on the right. Press [Next].
• If the Welcome dialog doesn't appear, proceed as follows:
(1) Click on the [Start] button on the toolbar and select the “Run”.
(2) Enter E:\software\setup.exe and then press [OK].
NOTE
If your CD-ROM drive is not drive E on your PC, you will need to
replace E with the correct drive letter assigned to your CD-ROM
drive.
If the software has been already installed, Uninstallation will be done. Click
[Cancel] button, then uninstallation will be canceled. If you uninstalled the
software by miss-operation, please re-install the software from rst procedure.
5) The License Agreement dialog appears. If you
accept it, press [Yes].
6) The Choose Destination Location dialog
appears. Press [Next].
7) Conrm the program folder name. If “Projector
Tools” is okay, press [Next] to continue. If not,
enter the desired folder name and then press
[Next].
• The C:\Program Files\Projector Tools\LiveViewer3 folder will be
created and the program will be installed into that folder. If you wish to install to
a different folder, click [Browse] and select another folder.
NOTE
3.2 Install “Live Viewer 3” (continued)