Hitachi CP-X417 Projector User Manual


 
40
Wired LAN
Subnet mask *1: 255.255.255.128
(example)
2) Click [Connect].
3) The network connection will be established.
Proceed to the item 3.6 Conrm the
connection to your destination. (50)
1) Enter the following information for the
projector.
3.4 Passcode connection (continued)
3. Using the Live Mode
*1 In case the case you use the Subnet mask except Class A/B/C, the screen is
appeared. Please set the Subnet mask.
• If you require the network setting information on the projector, take
the following procedure to nd it out.
1) Turn on the projector, and make sure that the projector image is on screen.
2) Press the MENU button on the remote control or the ▲/▼/◄/► buttons on
the projector to show the menu on screen.
3) Use the ▲/▼ cursor buttons to select the Advanced Menu, and use the ►
cursor button to enter the item.
4) Use the ▲/▼ cursor buttons to select the MIU, and use the ► cursor button
to enter the item.
5) Use the ▲/▼ cursor buttons to select the INFORMATION, and push the ►
cursor button.
6) The setting will be displayed in the MIU-INFORMATION box.
NOTE