Filter
Top Products
31
3. Using the Live Mode
3.3 Quick connection to the network (continued)
3.3.3 Connecting to the network
There are some options to connect to the
network.
• Enter PassCode
• Congure Manually
• Select From List
Select From List
Before selecting this item, your PC and the projectors need to be connected to the
same network.
If the connection is already established, select [Select From List].
From the list of the projectors connected to the network, select which projector
you would like to send your images. Proceed to the 3.6 Conrm the connection
to your destination. (50)
Enter PassCode
If you want to use the Passcode for network connection, select [Enter PassCode]
and click [NEXT].
The Passcode is given by the projector on screen. And you simply input the
Passcode to the “Live Viewer 3” to connect the network.
Proceed to the 3.4 Passcode connection. (32)
Congure Manually
Select [Congure Manually] and click [NEXT].
Then, there are 3 options on the manual connection method.
Select one of them to meet your requirement.
• Prole Proceed to the 3.5.1 Prole connection (41)
You just select one of the stored prole data to connect the network.
• History Proceed to the item 3.5.2 History connection (42)
Once connecting to the network, the “Live Viewer 3” stores the history.
If you need the same connection again, select [History].
Then, all you need to do is to select one of the history data from the list.
•
Congure Network Settings Manually Proceed to the item 3.5.3
Conguring manually (43)
If you need to make the setting manually, select [Congure Network
Settings Manually].