Filter
Top Products
60
3.8 Prole data
The network setting to connect the projector and PC can be stored as a prole
data. Once the data is stored, all you need to do is to select the data to connect to
the network. It is recommended when the same network connection is often used.
3.8.1 Outline of Prole data
The prole data is made on the Manual
Conguration screen. (41)
Up to 10 prole data can be stored for each
network adapter.
1) Select [Prole] and click [New].
2) The “Create new prole” will come up.
If you have already made 10 prole data,
you cannot make a new one, until you delete
a stored data.
Input all information required for your
network connection.
If you want to clear the information you input,
click [Clear].
3.8.2 Making Prole data
3) Click
[OK], after all information is set.
If you don’t want to store it, click [Cancel].
4) The new prole data is shown in the prole list, if you click [OK].
• When you make a new prole data, it is strongly recommended to
check that the new dada can work properly by selecting the data at the Prole
connection. (41)
• If you change a wireless network adapter on the projector or PC, make a new
prole data for the adapter.
NOTE
3. Using the Live Mode