Filter
Top Products
42
• The number of the history record is maximum 10 for each network
adapter. When the 11th data is stored, the oldest record among the 10 will be
overwritten.
• The data & time information in each history record is renewed when the
network is connected by using the history record.
• If the DHCP is set on in the projector, the network connection between the
projector and PC may not be established since IP address may be varied.
• Even if you use the prole connection, it will be memorized as a history
record.
NOTE
The “Live Viewer 3” can memory the network
settings when connecting to the projector as
a history record. After that, selecting a history
record can quickly connect the network with the
projector.
1) Select [History].
2) Choose a history record listed in the window.
3) Click [Connect].
3.5.2 History connection
3.5 Manual conguration (continued)
3. Using the Live Mode
4) The network connection will be established.
Proceed to the item 3.6 Conrm the connection to your destination. (50)
If you want to copy a history record to a prole data, select one of the history
record and click [Register to prole]. The prole data cannot be erased
automatically.