Hi-Touch Imaging Technologies CS-320 Printer User Manual


 
www.hi-ti.com
46
Appendix B Safety Instructions
Read these instructions carefully. Save these instructions for future reference.
Follow all warnings and instructions marked on the product.
1.Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
2.Do not use this product near water.
3.Do not place this product on an unstable cart, stand, or table. The product
may fall, causing serious damage to the product.
4.Openings in the cabinet and the bottom are provided for ventilation; to
ensure reliable operation of the product and to protect it from overheating,
these openings must not be blocked or covered. Placing the product on a
bed, sofa, rug, or any other similar surface should never block the
openings. These products should never be placed near or over a radiator
or a heat register, or in a built-in installation unless proper ventilation would
be provided.
5.This product should be operated with the type of power indicated on the
marking label. If you are not sure about the available power source, consult
your dealer or the local power company.
6.If an extension cord is used with this product, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the ampere rating of the extension cord. Also, make sure that the
total rating of all products plugged into the wall outlet does not exceed the
fuse rating.
Do not attempt to service this product yourself, as opening or removing
covers may expose you to dangerous voltage points or other risks. Refer all
servicing to qualified service personnel.