Filter
Top Products
96
www.honeywell.com/sensing
LINEAR AND ROTARY POSITION
DR Series
Durastar rodless linear position transducer
The DuraStar rodless linear position transducer is the longest lasting factory-
rugged potentiometer. It allows large misalignment of shaft and housing, while
providing whisper-quiet operation and smooth, clean signal output. MystR
®
provides the DuraStar excellent durability, especially in dither operation which
is so often the determining factor in a potentiometer’s life. It is an excellent
replacement unit to reduce maintenance operations.
The rodless side-sealed DuraStar can also be used to replace a rodded
potentiometer in contaminated applications to improve performance while
providing long life.
Operating temperature: -65 °C to 105 °C (-85 °F to 221 °F)
Supply voltage (max.): 75 Vdc
Linearity: ± 0.1 %
Starting force (max.): 0,45 kg (1.0 lb)
Backlash (max.): 0,025 mm (0.001 in)
Shaft: M5x0.8 metric thread
Termination: Connector, DIN 43560
Mechanical travel: = Electrical travel + 5,0 mm (0.2 in)
Mating connector included
ELECTRICAL TRAVEL TOTAL RESISTANCE HOUSING LENGTH REFERENCE
(MM (IN)) (OHM) (MM (IN))
101,6 (4.0) 2000 250,0 (9.84 ) DR04N02KB7G
127,0 (5.0) 2000 280,0 (11.02) DR05N02KB7G
152,4 (6.0) 5000 300,0 (11.81) DR06N05KB7G
203,2 (8.0) 5000 352,0 (13.86) DR08N05KB7G
228,6 (9.0) 5000 375,9 (14.80) DR09N05KB7G
304,8 (12.0) 5000 452,1 (17.80) DR12N05KB7G
355,6 (14.0) 5000 514,1 (20.24) DR14N05KB7G
406,4 (16.0) 5000 553,9 (21.8) DR16N05KB7G
457,2 (19.0) 5000 605,0 (23.8) DR18N05KB7G
508,0 (20.0) 5000 656,0 (25.83) DR20N05KB7G
609,6 (24.0) 10000 757,9 (29.84) DR24N10KB7G
762,0 (30.0) 10000 910,0 (35.83) DR30N10KB7G
914,4 (36.0) 10000 1062,5 (41.83) DR36N10KB7G
1016,0 (40.0) 10000 1164,0 (45.83) DR40N10KB7G
1270,0 (50.0) 10000 1418,0 (55.83) DR50N10KB7G
M5 X 0.8
Thread
M5 x 20
Thread
1
3
2
1.30
[33]
.65
[16]
.87
[22]
3.56
[90,4]
"L"
1.025
[26]
0.39
[10]
.60
[15]
3
2
1
SCHEMATIC DIAGRAM
1.50
[38]
.75
[19]
1.97
[50]
2.68
[68]
1.30
[33]
0.44
[11,2]
2.33 [59
,2
7]
1.46 [37,0]
2.05 [52,07]
Pin 1 is at the connector end