Filter
Top Products
19
The WLAN indicator turns on indicates that the wireless network
function is enabled.
4.2 Using the Home Storage Function
After a portable storage device is connected to the USB port on the rear
panel of the HG533, you can configure the HG533 through the samba
service to access the portable storage device. You can also play media files
with the media player using the DLNA function.
4.2.1 Reading and Writing Files on the Portable Storage
Device
To read and write files on a storage device and access the removable
storage device through the HG533 (using usb1 as the name for the storage
device as an example), do as follows:
Step 1 Set the user name and password of the portable storage device.
1. Log in to the web-based configuration utility.
2. Choose Advanced > USB Port > Samba.
3. Select the Enable Samba check box.
4. Click New.
5. Select the portable storage device (usb1) from the Device
drop-down combo box.
6. Set the user name and the password of the portable storage
device in the User name and Password text boxes.and then enter
the password again in the Confirm password text box to confirm
the password.
By default, both the user name and password for logging in to the
samba server are samba. In order to prevent unauthorized users
from accessing your portable storage device, please change them.
If the user name and password has been changed, use the correct
user name and password for logging in to the samba server.
7. Select an option from the Right drop-down combo box.
Step 2 Access the portable storage device.