Filter
Top Products
28
further checks as follows:
1. Stop the PPP dial-up software and then power off the terminal.
After five minutes, power on the terminal, and then use the PPP
dial-up software to dial again.
2. Restore the default settings of the terminal.
If the problem persists, contact your network operator.
Step 7 Check whether the proxy server of the Web browser is correctly
configured. Take the Internet Explorer installed on a computer
that runs Windows XP as an example. To check whether the
proxy server of the Web browser is correctly configured, do as
follows:
1. Launch the Internet Explorer.
2. Choose Tools > Internet Options.
3. In the Internet Options dialog box, click the Connections tab.
4. In the Local Area Network (LAN) settings group box, click
LAN Settings.
5. In the Proxy server group box of the Local Area Network
(LAN) Settings dialog box, ensure that the Use a proxy
server for your LAN (These settings will not apply to
dial-up or VPN connections). Check box is cleared.
Step 8 Try to access multiple Web sites to check whether the terminal
can access these Web sites.
If the terminal still cannot access Web sites, contact your network service
provider.
What can I do if Web pages often cannot be displayed during Web page
browsing and can be displayed after the terminal is restarted?
Step 1 Ensure that the terminal and other devices, such as telephones
or fax machines, are connected to telephone lines through a
splitter.
For details about how to install a splitter, see the related description in
the manual.
Step 2 Ensure that telephone lines are properly connected.
If the telephone lines are improperly connected, the stability of the
network connection is affected.